Replacement PCB for my Solarforce L2T 3 modes U2 XM-L

[edap617]

The circuit board of my Solarforce with 3 modes U2 XM-L module got busted after a few months of very light use.

Please help what SKU# of the replacement board available on DX.

Thanking you.

 

[pinetree89]

About any driver will work, you just have to decide how much current you want to supply the LED, what kind of voltage input you want, and what kind of modes (if any) you want.

You probably won't be able to match the old Solarforce board exactly using DX as they don't usually have the latest driver boards. With an XML you could probably get away with a driver putting out around 3A or 3000mA. Or get one a little lower for better runtimes.

For instance SKU 162788 puts out 2.8A, and has a 100% , 50% and Strobe mode with an input voltage of 2.7-4.2v if you plan on running it on Li-Ions.

 

[ada_potato]

The circuit board of my Solarforce with 3 modes U2 XM-L module got busted after a few months of very light use.

Please help what SKU# of the replacement board available on DX.

Thanking you.

Must be DX?

http://www.shiningbeam.com/servlet/the-132/3-dsh-Mode-Regulated-Circuit-Board/Detail