Sold/Expired Sinner Customs - Tri-EDC's and more - this run CLOSED

[Ozythemandias]

Re: Sinner Customs - Tri-EDC's and more.

Be careful. It may use 2mm bolts with extra wide spacing. This was used for the stainless steel convoy clip. Any McGizmo or equivalent will show large gaps at the holes.

Just program the H17F to stop at level 22 (max 3A) if you are worried.

Looks like you were right, Oveready clip for 1" light doesnt fit

I measured spacing, its about 8mm, maybe a little more. Bolts I have are 1.9mm and fit.

So you say the Convoy clip and McGizmo will both fit? Are there any compatible black clips?

 

[xdayv]

Re: Sinner Customs - Tri-EDC's and more.

quick noob Q for you Sinners: is there a PWM (sound) on level 3 & 4 of the Tri-EDC 18350 Nichia 219B?

 

[Justintoxicated]

Re: Sinner Customs - Tri-EDC's and more.

quick noob Q for you Sinners: is there a PWM (sound) on level 3 & 4 of the Tri-EDC 18350 Nichia 219B?

I'm not sure I replace the driver in mine so i could run a ramping ui, some pwm drivers will do it while others won't, even if it's the same diver. One of my mountain drivers has some noise at one level too... Also most people older than me cannot hear it.

 

[SweetLights]

Re: Sinner Customs - Tri-EDC's and more.

I am fairly new to the EDC world and have been thoroughly impressed by your lights. Are you taking orders on Sinners still? I would be highly interested in purchasing one.

 

[coldshot]

Re: Sinner Customs - Tri-EDC's and more.

Hey Sinner,

I've got one of your early titanium Tri-EDC 18350 Nichia 219B. The switch has started to fail intermittently. I need to get it replaced. Unable to send you a PM as your box it full. Can you shoot me a PM with instructions for returning it for service?

 

[sinner-cpf]

Re: Sinner Customs - Tri-EDC's and more.

Hi Rob, i'll send a pm shortly.
Inbox cleared thanks for letting me know.

 

[xdayv]

Re: Sinner Customs - Tri-EDC's and more.

What are the estimated output in lumens for the FET channels?

 

[wimmer21]

Re: Sinner Customs - Tri-EDC's and more.

Anyone know the beam temp on the Sinners at Urban edc? 4000k or 5000k maybe?

 

[sinner-cpf]

Re: Sinner Customs - Tri-EDC's and more.

Anyone know the beam temp on the Sinners at Urban edc? 4000k or 5000k maybe?

5000K Neutral White.

 

[dawgfan76]

Re: Sinner Customs - Tri-EDC's and more.

I just bought this Ti 18650, but do not know the specs. Can anyone tell by these pics? Thank you!

 

[sinner-cpf]

Re: Sinner Customs - Tri-EDC's and more.

First gen. XP-L V6-2A (Domed Emitters w/ modified optics) , Max Lumens A17DD-S08 Driver.

 

[justanotherguy]

Re: Sinner Customs - Tri-EDC's and more.

Just wanted to make note, I have a triple Sinner..not even sure what it is, I know the LED's got changed to Nichia...But is fantastic and beat to SH** at work... battle scarred and I wouldnt trade it for anything!

 

[Tejasandre]

Re: Sinner Customs - Tri-EDC's and more.

Pics!!!

 

[KC_Knives]

Re: Sinner Customs - Tri-EDC's and more.

Any idea when books will open back up?

 

[WinterShadow]

Re: Sinner Customs - Tri-EDC's and more.

Hello, is it possible to order one with a single emitter with reflector? :twothumbs

 

[Trenchant]

Re: Sinner Customs - Tri-EDC's and more.

sinner-cpf: I'm glad I found this thread. Now I know where to get more info about your work and how to contact you.

All the best!

 

[xdayv]

Re: Sinner Customs - Tri-EDC's and more.

Where can I get screws for Sinner? Or any compatible screws from other customs I should be looking at? Thanks!

 

[sinner-cpf]

Re: Sinner Customs - Tri-EDC's and more.

Hi xdayv, screws are M2.5 (metric) 4-6mm long screws work perfectly.

 

[emarkd]

Re: Sinner Customs - Tri-EDC's and more.

@sinner-cpf, whatever happened with these? https://www.instagram.com/p/BW7YDdmjH5C/


Did I miss them? Are they still getting done? I'd love to have one in this body style!

 

[xdayv]

Re: Sinner Customs - Tri-EDC's and more.

Hi xdayv, screws are M2.5 (metric) 4-6mm long screws work perfectly.

Thank you Sir. Marhaba!