got a new weapon. Glock 21C.
WTF are these Bodies, I cant find them anyplace on the Surefire website.
SureFire's description does not mention that it fits the Compact. Which fits with it not fitting the Compact. In fact, the Nitrolon (P-Series), Millennium (M-Series) and Military (W-Series) versions do specifically state they are not for the Compact.
It is a genuine SureFire WeaponLight back from the days before branding. Back then there was only SureFire/Laser Products!
feel free to PM be about that before you put it up in marketplace :twothumbsThat's good, then I can put it out for sale without a worry
Thanks again for the help.
ASA15 with ITI M6X, CompM2, Beta-Cmag.
A PS90 and MSAR AUG - with Inova XO lights.
Both also have XPS EOtechs and the PS90 has a Lasermax Unimax in front of the Eotech.
It looks like you are using a spacer? inbetween the black cell and the light contact?
There is no real way to mount a rail in the polymer stock without messing it up possibly, and also destroying the warranty. There is a TDI rail that can be mounted in that block depression of the metal receiver, but it requires drilling a hole all the way thru the receiver. And, that would still be high for a pressure switch. There is really no other solution.
Well, drilling the receiver on the real one will kill the warranty. FN is real big on any tampering with the receiver (short barreling it voids the warranty), or any messing with the trigger pack to lighten the trigger.
I used to run the FN Forum. There is a sponsor there that will install a laser into the stock. Doing that will void the warranty as well.
But thanks for the suggestion. The pressure switch is for the laser actually - and the only other way to activate it is with the manual switch on the back. You really only use that setup when its mounted on a handgun. So, there isn't really anyway around the pressure switch w/o making the operation more complicated.
I have the switch far enough forward that I do not activate the laser unless I really want to. I prev had a cheaper laser with a tiny pressure switch. I was able to put that on the very front, flat part of the polymer stock below the barrel. But the Lasermax pressure switch is much too long for that.