What is missing?

[cenz]

How about SF623? I'm really interest in it...

Multible C or D body system for FM26500 tube/26500Megalennium (extender, 26/32/500~700 sizes), actually, it is quite practical direction.

Superbulb socket for SF M head and fit into almost FM Turboheads...

Thanks!

 

[pete7226]

I cant find your link to the surefire 2" C turbohead anywhere.

 

[donn_]

I cant find your link to the surefire 2" C turbohead anywhere.

Neither can I. Have I missed something?

 

[cernobila]

I cant find your link to the surefire 2" C turbohead anywhere.

Same here, know nothing about it.......what lamp/bulb does this use?.....availability and cost?

 

[cenz]

Same here, know nothing about it.......what lamp/bulb does this use?.....availability and cost?

It seems in process, I hope that can support G4 bi-pin bulb and support 5761 fatter model.

 

[copperfox]

I would like to see a 3-4" turbohead for mag-C with a LOP reflector, simple exterior design, in black. It would be great if it was offered in both 8.4mm and 12+mm bulb openings.

 

[cernobila]

Actually, is there a replacement for the SF KT turbo head? Same kind of thrower that fits the C/P SF/Solarforce/and many other bodies. This would be for those internationals that cant easily buy the SF KT head, or find it too expensive.

 

[Outdoors Fanatic]

I'd like a really long runtime (1+ hour) 9V SF Turbohead lamp assembly for 2x li-ion cells (I know the MN15 runs for 2.5 hours in the M6, but it takes 6xCR123 for that..)

 

[Outdoors Fanatic]

Actually, is there a replacement for the SF KT turbo head? Same kind of thrower that fits the C/P SF/Solarforce/and many other bodies. This would be for those internationals that cant easily buy the SF KT head, or find it too expensive.

Maybe we should ask Lumens Factory for something like that? They've already came out with a D36 Mini-Turbohead to fit SureFire 'C' models...

 

[cernobila]

I'd like a really long runtime (1+ hour) 9V SF Turbohead lamp assembly for 2x li-ion cells (I know the MN15 runs for 2.5 hours in the M6, but it takes 6xCR123 for that..)

The MN15 is still a good choice for that.....

From mdocod's data;

Cell configuration: 2x18650

Bulb Options:
SF MN15: 10W, 154 - 103 lumen in 104 minutes
SF N2: 10W, 154 - 103 lumen in 104 minutes
SF MN16: 20.5W, 360 - 215 lumen in 43 minutes
SF MN20: 20W, 300 - 186 lumen in 47 minutes
SF MN21: 37W, 600 - 375 lumen in 15-20 minutes (unprotected cells required, dangerous configuration)
LF HO-M3T: 16W, 280 - 188 lumen in 60 minutes
LF EO-M3T: 18.5W, 322 - 212 lumen in 49 minutes
GE787 w/FM bi-pin>MN socket:
WA1111 w/FM bi-pin>MN socket:
Osram 64250 w/FM bi-pin>MN socket:
Philips 5761 w/FM bi-pin>MN socket: (requires unprotected LiCo cells, only recommended for advanced users.)

Body Options:
FiveMega or Leefbody 2x18650 w/C tail and head, +SF compatible tail-cap, +KT1/2 ++
Leefbody 2x18650 w/C tail and M head, + SF compatible tail-cap, +KT4 ++
SureFire M6 w/2x18650 adapter

 

[cernobila]

Maybe we should ask Lumens Factory for something like that? They've already came out with a D36 Mini-Turbohead to fit SureFire 'C' models...

Yes that would be a good idea, their flashlight system could then fit the D26, D36 and also the MN style lamps in a turbo head. Would be one heck of a Lego system for sure.......as well as fitting most other C bodies in both, 18650 and "C" size.

 

[cenz]

I'd like a really long runtime (1+ hour) 9V SF Turbohead lamp assembly for 2x li-ion cells (I know the MN15 runs for 2.5 hours in the M6, but it takes 6xCR123 for that..)

I've tried to use two IMR26500s to power MN15, rated 1.15A at tailcap, body is FM 2x26500, I think it's abit overdrive the bulb, however, the runtime is nice.

 

[fivemega]

I would like to have a Mag D throwmaster head with 8.5 mm opening for smaller bulbs as is available with the mag charger throwmaster head - which I have and absolutely love.

This is a good idea but many people use 2.5" head for larger size bulb and some enlarge 1/2" bulb opening to 5/8" for even larger size bulbs.

- An incan regulator for SureFire tailcaps, single-stage only(full power). That's all I need. Anyone will step up??

I will gladly use this kind of regulators in my custom flashlights if anybody can produce them.

Let's have them in silicone! Lots of different colors, dishwasher safe, heat-resistant, infinite shapes. Also tubes to protect the bodies of the lights.

This is basicaly rubber like sleeve similar to Streamlight Scorpion. Right?

A D36 reflector to fit your FM D26 bi-pin module so i can run a 1794 with AW soft start in a LF or Cabelas Mini Turbo head on my FM 2x26500 body!

Is this better than what I describe about 2" head for C heads?
These heads must be used with D26 module such as FM D26, G4 D26, P91, P7 drop in and ...

I was looking at one of my multi bit screwdriver that allows me to change bits by rotating the body and pushing a new bit into place. How about a system to allow multiple incan bulbs in the same head and selectable by rotating a mechanism on the head or body?

Absolutely possible but high cost of such mechanism makes people to step away.

How about SF623? I'm really interest in it...
Multible C or D body system for FM26500 tube/26500Megalennium (extender, 26/32/500~700 sizes), actually, it is quite practical direction.
Superbulb socket for SF M head and fit into almost FM Turboheads...
Thanks!

The problem for powering 623 is length of 4x26500 which will be way out of $urefire tactical form factor.
Just imagine these flashlights with length of 4x26500.

I cant find your link to the surefire 2" C turbohead anywhere.

I just said these are existed.
I didn't say these are available.

Same here, know nothing about it.......what lamp/bulb does this use?.....availability and cost?

Any lamp that can be used with FM D26 or G4 D26 such as WA1111, WA1185 and...
Availabiliblity by end of August.
Price about $90

It seems in process, I hope that can support G4 bi-pin bulb and support 5761 fatter model.

Will take any WA T2.25
You will have to enlarge bulb opening for 5761

I would like to see a 3-4" turbohead for mag-C with a LOP reflector, simple exterior design, in black. It would be great if it was offered in both 8.4mm and 12+mm bulb openings.

2.5" TM are simple design and fit M*g "C"

I'd like a really long runtime (1+ hour) 9V SF Turbohead lamp assembly for 2x li-ion cells (I know the MN15 runs for 2.5 hours in the M6, but it takes 6xCR123 for that..)

Have you ever try Carley 1057 with 2x18650?

I've tried to use two IMR26500s to power MN15, rated 1.15A at tailcap, body is FM 2x26500, I think it's abit overdrive the bulb, however, the runtime is nice.

For lower lumen output, WA1148 is perfect choice when driven with 2x26500 IMR cells.
--------------------
[size=+3]What else is missing?[/size]

 

[LuxLuthor]

[SIZE=+3]What else is missing?[/SIZE]

More people to buy and appreciate your mods so you don't get discouraged and stop. I'm doing my part.

That head is gorgeous, and needed for CL-1794's heat. Two are guaranteed sold.

 

[donn_]

This is basicaly rubber like sleeve similar to Streamlight Scorpion. Right?

I'm not familiar with the Scorpion, but here's what it is:

They used to sell them alone, or with colored plastic lenses. I think you can still get the kit for MiniMags, but I haven't seen the larger ones for a long time.

 

[fivemega]

I would like to have a Mag D throwmaster head with 8.5 mm opening for smaller bulbs as is available with the mag charger throwmaster head - which I have and absolutely love.

These are available here.
---

I cant find your link to the surefire 2" C turbohead anywhere.

They are available here.
---

Let's have them in silicone! Lots of different colors, dishwasher safe, heat-resistant, infinite shapes. Also tubes to protect the bodies of the lights.

I afraid cost of molding will be too high for small quantity.
Best choice is to make them from machinable plastic.
---
[size=+3]What else is missing?[/size]

 

[RyanA]

How about "The Ultimate Emergency Light"

A 2d mag tri bored with a 4s3p cr123 battery adapter (12v @ ~4.5ah?) powering a 14 watt WA solarc bulb and ballast. I think runtime should be in the 3.5-4 hour ballpark.

 

[Drywolf]

How about a 4P 18650 holder for Elephant II, also a 3P 17670 holder for tri bored mags. (SST-90)

 

[donn_]

I'd like to see a deep reflector assembly, in VLOP, for the FM3 heads. I'd like to see it with a large (~15-16mm) aperture and a removable cam which can accept the bi-pin holder adapter.

 

[c0t0d0s0]

I'd like to see a FM D36 reflector/G4 adapter for LF D36 mini-turboheads.

Yes I'm aware you make a 2" turbohead for C hosts, but I find it too bulky. A D36 head is more pocketable yet throws much better than a D26.

The LF D36 heads are inexpensive, cleanly styled, and look great on HA SF hosts, as well as on Seraph lights. As such, they are becoming popular. This platform could really benefit from an alternative to LF D36 drop-ins, and G4-type bulbs in D36-sized reflector would deliver just that.

Additionally, you could produce a similar D36 head in black HA, for better match to other C-hosts, including your own (the LF head is only available in grey HA). There will also be people who would want to run LFand nailbender's D36 modules using your bodies.

I'm sure it would sell like hotcakes.