DellSuperman
Flashlight Enthusiast
New spring as standard, as used by Tana.
I can use shorter spring if requested, height difference ~2mm.
Batch 8:
1-5) offgridlled *paid & shipped*
6-9) dkman *paid & delivered*
10-12) morepho87 *paid & shipped*
13-14) factor8 *paid & shipped*
15-18) nervouswreakdiver *paid & shipped*
19) crouquette *paid & shipped*
20) KITROBASKIN *paid & shipped*
21) Flucero28 *paid & shipped*
22) Rstype *paid & shipped*
23) 2cut2 *paid & shipped*
24-25) jdboy *paid & shipped*
26) bitgeek *paid & shipped*
27-28) KBobAries *paid & shipped*
29) scintillator *paid & shipped*
30-31) indadark *paid & shipped*
31-32) id30209 *paid & shipped*
33)
34)
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
Price for 1 switch is $25.
Tracked shipping to any country is $7.50 & $2 for every additional switch.
Sorry, these little things are quite heavy with the brass rings.
Some additional information:
These switch will work in all Z41 based tail-cap that can accommodate the McClicky brass ring.
So far these are the few that can work:
- Surefire Z41 tailcap
- Surefire X-series tailcap
- OR Diamondback tailcap
- Cyros tailcap
- TnC tailcap
- Solarforce P1D
Parts used:
Judco 10A switch
Spring: Top diameter 4mm, base diameter 6.6mm, height 6.2mm, line thickness 0.6mm
Brass McClicky retaining ring
Selley's 2 Part Epoxy
Sales Information:
** Disclaimer **
The listing is based on a first come first serve basis (PM or on thread).
As I will be making these switches after work, I will probably be able to complete 1 to 2 pieces at a time, hence it will take time & they will be sent to those names based on numerical order.
The ETA is a rough estimate since I am buying parts from various sources & their shipping time are different.
** Payment & Shipping **
I will not accept any payment upfront or deposit till the switches are almost ready to be shipped.
I will contact you via PM when your switch(es) are ready & prompt payment is appreciated.
Please include ur CPF name in the PayPal note & address will be based on PayPal listed address.
I will not be held responsible for packages once I hand them over to the post office.
But so far, I have a pretty good track record with Singpost to most countries, so there shouldn't be anything to worry about.
Original sales thread is here.
Thanks for looking.
I can use shorter spring if requested, height difference ~2mm.
Batch 8:
1-5) offgridlled *paid & shipped*
6-9) dkman *paid & delivered*
10-12) morepho87 *paid & shipped*
13-14) factor8 *paid & shipped*
15-18) nervouswreakdiver *paid & shipped*
19) crouquette *paid & shipped*
20) KITROBASKIN *paid & shipped*
21) Flucero28 *paid & shipped*
22) Rstype *paid & shipped*
23) 2cut2 *paid & shipped*
24-25) jdboy *paid & shipped*
26) bitgeek *paid & shipped*
27-28) KBobAries *paid & shipped*
29) scintillator *paid & shipped*
30-31) indadark *paid & shipped*
31-32) id30209 *paid & shipped*
33)
34)
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
Price for 1 switch is $25.
Tracked shipping to any country is $7.50 & $2 for every additional switch.
Sorry, these little things are quite heavy with the brass rings.
Some additional information:
These switch will work in all Z41 based tail-cap that can accommodate the McClicky brass ring.
So far these are the few that can work:
- Surefire Z41 tailcap
- Surefire X-series tailcap
- OR Diamondback tailcap
- Cyros tailcap
- TnC tailcap
- Solarforce P1D
Parts used:
Judco 10A switch
Spring: Top diameter 4mm, base diameter 6.6mm, height 6.2mm, line thickness 0.6mm
Brass McClicky retaining ring
Selley's 2 Part Epoxy
Sales Information:
** Disclaimer **
The listing is based on a first come first serve basis (PM or on thread).
As I will be making these switches after work, I will probably be able to complete 1 to 2 pieces at a time, hence it will take time & they will be sent to those names based on numerical order.
The ETA is a rough estimate since I am buying parts from various sources & their shipping time are different.
** Payment & Shipping **
I will not accept any payment upfront or deposit till the switches are almost ready to be shipped.
I will contact you via PM when your switch(es) are ready & prompt payment is appreciated.
Please include ur CPF name in the PayPal note & address will be based on PayPal listed address.
I will not be held responsible for packages once I hand them over to the post office.
But so far, I have a pretty good track record with Singpost to most countries, so there shouldn't be anything to worry about.
Original sales thread is here.
Thanks for looking.
Last edited: