I only recently (last few days) bought the screws. It was up. Got confirmation emails too. I hope this isn't a sign of something more ominous. Can they be bought elsewhere?Made some changes and updated post #1 and #2.
Also, Knife Kits' (pocket clip screws) server is down. Not sure if it's permanent or not.
Ended up arriving yesterday before I got home. I didn't hesitate to swap them on! �� Not sure if anyone has bought them for their own Tri yet but they do require some shortening. I used a bench grinder to incrementally trim them down. (titanium sparks are so white and pretty BTW!)
Michael from KnifeKits was also quick to email me a response. Will be buying again in the future. I bought 4 screws anyway to make the shipping more worth it.
The Tri engines that use the L333 Lux-RC board appear to be capable of handing 1 or 2 Li-ion cells....
It came up in another thread that Precisionworks can bore Mac's for 18mm cells. I already knew about this but for some reason or another it didn't make it into my guide Now go get your 16mm lights bored for maximum power output :thumbsup:
Made some changes and updated post #1 and #2.
Also, Knife Kits' (pocket clip screws) server is down. Not sure if it's permanent or not.
If anyone is looking for ti clip screws, they can be found here:
http://www.lunsfordracing.com/mm5/m...&Product_Code=A4B0187&Category_Code=STDBUTTON
These are the right size and shouldn't need to be cut down.