tech25
Flashlight Enthusiast
Best ventriloquist show!
Hey HOGO see that picture of the twisty?? See people still want them just saying.
It should work with any clip that has a design similar to the McGizmo clip. Several brands use similar clips nowadays. You might need to shave a little material off the top edge of the clip so the rotary dial won't scrape against it, but that only takes a minute with a Dremel sanding drum and another minute with a piece of emery paper to make the edge straight and flat.Ok I thought about fyrstormers clip idea... I like it. Will this configuration work with different clips as in from oveready etc??? Or just this one? Maybe holes for clip in this location and filler screws or stop crews for those who don't want to use the clip? Bezel down for me is best if I m using a clip... bezel down or up for holster. 樂
I applaud FS's clip solution, at the moment it seems to be the only bezel down clip option out there. I personally would love something more deep carry, either a u-shaped clip that mounts there or another as-yet vaporware solution.
This light is the one I would have loved to have bought from Turbodog. I was able to buy a 123 version of this light from him and it is by far my favorite HDS of all time BECAUSE OF THE CLIP. This bezel down configuration with the tapped holes (that take regular 4-40 screws) and this long stable clip just carries well. Yes, it the clip forces the light to carry a bit further from the body than if it were more of a traditional clip mounted on the tail, but for the HDS rotary, this is the best solution that I have found.
Ya that makes sense. 😁Too many people pissed and moaned about the holes.
I never understood why HDS doesn't drill and tap for a clips on the new lineup. It worked just fine on older HDS lights.
😂😂😂😂That would make them users and take away from the artistry and beam shot photos
If I remember correctly Henry is not a clip Person and the Holes would be also a weak point in the light Design.
...
~5 mm?As far as weak point, nope. There is material specifically in the design for the clip holes. It's probably the strongest point in the light. When the holes disappeared, the material stayed in place... was not removed.