sunny_nites
Enlightened
Continuation from the Homemade and Modified Flashlights Discussion:
Introducing the Micro ATL Generation 3 (sold out, at least for now) and 4!
Note: Thanks, everyone, for the awesome response!! It looks like the G3s are all committed and we will be moving forward with G4 sales.
Thanks again!!
G3: (Sold out, at least for now)
G4:
These lights are powered by a 240mah, rechargeable, lithium polymer battery and use the X-Light Micro controller, with instant access to full and low power and full range of brightness adjustment all controlled by the single power button.
Compared next to the X-Light donor, the Micro ATL is actually smaller but packs three LEDs and a high power, rechargeable battery into a study metal frame.
The Micro ATLs are recharged via set screw covered port, using the included 300mah (or a max of 300mah depending on your USB ports capabilities) USB powered charger.
The 240mah lipo gives the Micro ATL up to 4 hours of runtime on full brightness and recharges in approximately 1 hour or less.
The G3s are available in aluminum or brass. Both are available in a brushed finish and the brass is also available in a polished brushed finish.
Polished brass G3.
(sorry, just realized I don't have a good picture of a polished brass G3 but here is a polished copper G4 for you to enjoy for the moment)
The G4s will be available in aluminum, brass and copper and the brass and copper will also be available in a brushed or polished brushed finish.
The Micro ATLs feature neodymium, rare earth magnets so they can be attached to metal objects for hands free lighting.
(again, I apologize but I don't have any pictures at the moment of a G3 or G4 utilizing the magnet. This is a picture of a no longer in production G2 clamped onto a file cabinet)
These lights also come with a beacon feature behind the primary LEDs, to assist in finding the light and anything it is attached to in the dark. The beacon isn't quite as bright as it appears in this blacklight photo but it is most definitely, highly visible in the dark.
The Micro ATLs use Nichia and Cree 5mm LEDs and will be available in a choice of combinations. I will be posting beam shots of those various combinations soon.
Prices:
Prices are in US $$ and are the same for both generations.
Aluminum = $85.00
Brass and copper brushed finish = $90.00
Brass and copper polished brushed finish = $95.00
Please realize that this is a work in progress (as evidenced by several missing pictures, etc) and I will be posting frequent updates as I get them.
Also, the G3s may only be available for a limited time (depends on how much demand there is after this run is sold out). So, if you fancy a G3 make sure you get your order in early!
Everyone that signed up on the list from the Homemade Lights forum is already set so no need to re-order.
Thanks and stay tuned!!
Introducing the Micro ATL Generation 3 (sold out, at least for now) and 4!
Note: Thanks, everyone, for the awesome response!! It looks like the G3s are all committed and we will be moving forward with G4 sales.
Thanks again!!
G3: (Sold out, at least for now)
G4:
These lights are powered by a 240mah, rechargeable, lithium polymer battery and use the X-Light Micro controller, with instant access to full and low power and full range of brightness adjustment all controlled by the single power button.
Compared next to the X-Light donor, the Micro ATL is actually smaller but packs three LEDs and a high power, rechargeable battery into a study metal frame.
The Micro ATLs are recharged via set screw covered port, using the included 300mah (or a max of 300mah depending on your USB ports capabilities) USB powered charger.
The 240mah lipo gives the Micro ATL up to 4 hours of runtime on full brightness and recharges in approximately 1 hour or less.
The G3s are available in aluminum or brass. Both are available in a brushed finish and the brass is also available in a polished brushed finish.
Polished brass G3.
(sorry, just realized I don't have a good picture of a polished brass G3 but here is a polished copper G4 for you to enjoy for the moment)
The G4s will be available in aluminum, brass and copper and the brass and copper will also be available in a brushed or polished brushed finish.
The Micro ATLs feature neodymium, rare earth magnets so they can be attached to metal objects for hands free lighting.
(again, I apologize but I don't have any pictures at the moment of a G3 or G4 utilizing the magnet. This is a picture of a no longer in production G2 clamped onto a file cabinet)
These lights also come with a beacon feature behind the primary LEDs, to assist in finding the light and anything it is attached to in the dark. The beacon isn't quite as bright as it appears in this blacklight photo but it is most definitely, highly visible in the dark.
The Micro ATLs use Nichia and Cree 5mm LEDs and will be available in a choice of combinations. I will be posting beam shots of those various combinations soon.
Prices:
Prices are in US $$ and are the same for both generations.
Aluminum = $85.00
Brass and copper brushed finish = $90.00
Brass and copper polished brushed finish = $95.00
Please realize that this is a work in progress (as evidenced by several missing pictures, etc) and I will be posting frequent updates as I get them.
Also, the G3s may only be available for a limited time (depends on how much demand there is after this run is sold out). So, if you fancy a G3 make sure you get your order in early!
Everyone that signed up on the list from the Homemade Lights forum is already set so no need to re-order.
Thanks and stay tuned!!
Last edited: