So I have been working with a design that utalized the bridgelux arrays... I was planning on using the unit that produced 1320LM at 12.8V 1.05A
That would give me roughly 3960LM if I used 3 in series
As I am learning about drivers etc I have found that by running this setup off a hyperboost driver being pushed with a 12V battery it puts me pulling around 3.7A
Thats a little high for my liking so it got me thinking abou efficiency..
Any thoughts on some different LEDs that may be more efficient. I would like to keep the setup using 3-4 leds however im not against 6 or so if it really makes a difference
any thoughts
That would give me roughly 3960LM if I used 3 in series
As I am learning about drivers etc I have found that by running this setup off a hyperboost driver being pushed with a 12V battery it puts me pulling around 3.7A
Thats a little high for my liking so it got me thinking abou efficiency..
Any thoughts on some different LEDs that may be more efficient. I would like to keep the setup using 3-4 leds however im not against 6 or so if it really makes a difference
any thoughts