Dmitriyrus
Newly Enlightened
- Joined
- Mar 16, 2012
- Messages
- 57
New Lemax LX70. Killer Polarion PH50.
Update information : This thread about XeRay XV-LX70
The difference from Lemax LX70 can be found here:
http://www.candlepowerforums.com/vb/showthrea.php?378748-XV-LX70-vs-Lemax-LX70
XeRay™ XV-LX70 description
Quality & Design
This HID searchlight meets the demand of IK07 protection index against mechanical impact according to EU standard and IP68 protection index against liquid intrusion according to EU standard.
Body materials and surface treatment
Aerospace Aluminum alloy 6061 T6, 6082, Marine Aluminum Alloy 5083. All surfaces are hard anodized per MIL-A-8625.
HID light engine
This HID searchlight is powered by our propriety XeVision™ XePuck™ high efficiency digital ballast. Only genuine German brand HID bulbs are used, driven by our patented XeSparQ™ igniter. The emitted light from this source is formed to a precise beam by means of an electroformed (EF) 100 mm diameter parabolic reflector of highest precision and quality.
Lamp reflector
The outstanding reflector performance has been accomplished by using electro forming (EF) technology and high reflectance in the visible spectrum through a special Al coating and protection layer. The parabolic reflector surface is without visible distortions resulting in exceptional beam geometry and efficiency.
Power control electronics
Where necessary, all electronic contacts are gold plated. Electronics are RoHS compliant. An integrated power management system allows powering the HID searchlight with the attached battery pack or through an external power supply (12 VDC supply: wall outlet, vehicle system, generator). Furthermore, Dual Power mode can be locked for single Power use though this power management system.
Front glass lens
Very strong hardened and scratch proof and heat proof tempered Borosilicate glass. The glass is tested against impact according to the EU standard.
Battery pack
The safest available Li-Ion battery cells with highest quality are used for the battery packs. The batteries feature a protection circuit, and are designed for fast charging and many hundreds of charge cycles.
XeRay™ XV-LX70 specifications
Dual Light source power (DPM), switchable: 50 W and 70 W
Luminous flux: 5300 lumens (50 W) and 7500 lumens (70 W)
HID bulb life: 2000 hours with DL50/740 and XeSparQ™
Color temperature: 4000 °K @ 50 W
Input power: 12V DC
Reflector: Electro-formed (EF) parabolic Ni cup, 100 mm ∅
Beam pattern approx.: center beam 1º, spill ring 15º @ 70 W
Effective illumination distance: 1300+m @70 W, 1000+m @50 W
Maximum lighting distance: 3000 m / 3280 yd.
Magnetic rotary ring switch: OFF, left turn 5 0W , right turn 70 W
Ingress protection: IP68
Water resistance: 50 m / 164 ft.
Rechargeable Li-Ion battery pack 14.4 VDC, 8500 mA
Battery pack life cycles: 1000
Battery pack run time: 140 min. / 100 min. (50/70 W)
Battery pack charge time: 350 min. (at 20°C)
Working temperature: -20°C [-4°F] up to +60°C [+140°F]
Max. working temp.: +120°C [+248°F] , max. 1 min.
Head bezel diameter: 117 mm / 4.61"
Body diameter: 69 mm/ 2.72"
Length: 318 mm / 12.52"
Weight with handle: 2200 g [4.85 lb.]
Body: Al alloy 6082 with rubber O-ring protection
Surface treatment: Hard anodizing: MIL-A-8625 mat black
Handle: Fiber reinforced ABS, removable
Tripod mount: 2 standard photographic tripod screw holes
Bulb change time: approx. 1 min.
Update information : This thread about XeRay XV-LX70
The difference from Lemax LX70 can be found here:
http://www.candlepowerforums.com/vb/showthrea.php?378748-XV-LX70-vs-Lemax-LX70
XeRay™ XV-LX70 description
Quality & Design
This HID searchlight meets the demand of IK07 protection index against mechanical impact according to EU standard and IP68 protection index against liquid intrusion according to EU standard.
Body materials and surface treatment
Aerospace Aluminum alloy 6061 T6, 6082, Marine Aluminum Alloy 5083. All surfaces are hard anodized per MIL-A-8625.
HID light engine
This HID searchlight is powered by our propriety XeVision™ XePuck™ high efficiency digital ballast. Only genuine German brand HID bulbs are used, driven by our patented XeSparQ™ igniter. The emitted light from this source is formed to a precise beam by means of an electroformed (EF) 100 mm diameter parabolic reflector of highest precision and quality.
Lamp reflector
The outstanding reflector performance has been accomplished by using electro forming (EF) technology and high reflectance in the visible spectrum through a special Al coating and protection layer. The parabolic reflector surface is without visible distortions resulting in exceptional beam geometry and efficiency.
Power control electronics
Where necessary, all electronic contacts are gold plated. Electronics are RoHS compliant. An integrated power management system allows powering the HID searchlight with the attached battery pack or through an external power supply (12 VDC supply: wall outlet, vehicle system, generator). Furthermore, Dual Power mode can be locked for single Power use though this power management system.
Front glass lens
Very strong hardened and scratch proof and heat proof tempered Borosilicate glass. The glass is tested against impact according to the EU standard.
Battery pack
The safest available Li-Ion battery cells with highest quality are used for the battery packs. The batteries feature a protection circuit, and are designed for fast charging and many hundreds of charge cycles.
XeRay™ XV-LX70 specifications
Dual Light source power (DPM), switchable: 50 W and 70 W
Luminous flux: 5300 lumens (50 W) and 7500 lumens (70 W)
HID bulb life: 2000 hours with DL50/740 and XeSparQ™
Color temperature: 4000 °K @ 50 W
Input power: 12V DC
Reflector: Electro-formed (EF) parabolic Ni cup, 100 mm ∅
Beam pattern approx.: center beam 1º, spill ring 15º @ 70 W
Effective illumination distance: 1300+m @70 W, 1000+m @50 W
Maximum lighting distance: 3000 m / 3280 yd.
Magnetic rotary ring switch: OFF, left turn 5 0W , right turn 70 W
Ingress protection: IP68
Water resistance: 50 m / 164 ft.
Rechargeable Li-Ion battery pack 14.4 VDC, 8500 mA
Battery pack life cycles: 1000
Battery pack run time: 140 min. / 100 min. (50/70 W)
Battery pack charge time: 350 min. (at 20°C)
Working temperature: -20°C [-4°F] up to +60°C [+140°F]
Max. working temp.: +120°C [+248°F] , max. 1 min.
Head bezel diameter: 117 mm / 4.61"
Body diameter: 69 mm/ 2.72"
Length: 318 mm / 12.52"
Weight with handle: 2200 g [4.85 lb.]
Body: Al alloy 6082 with rubber O-ring protection
Surface treatment: Hard anodizing: MIL-A-8625 mat black
Handle: Fiber reinforced ABS, removable
Tripod mount: 2 standard photographic tripod screw holes
Bulb change time: approx. 1 min.
Last edited: