Tulip bush
Enlightened
- Joined
- Nov 26, 2012
- Messages
- 232
1st tiara......flicker on turbo and switch to high main after about 30 secs.
2nd tiara....... As above but would hold turbo a bit longer.
3rd tiara.....Would only cycle to 2 main.
Kept tiara number one for my dad as he's unlikely to use turbo. Other two sent back to shop.
All above were tested on good batteries, in fact I went and bought some fresh ones just to double check. Shop triple checked them....they were definitely all faulty.
The flickering on my Viking pro has stopped last few times I've been out.
1....A strobe still keeps appearing and disappearing after the high main in hunting mode, but you say that it's probably has the new software or something.......so what I would like to know is am I some how activating this strobe and disabling it without knowing......not having the instructions for the new software I'm a bit in unsure if I'm doing something I'm not aware of.
2....Also if the light is on and I switch off via the tail cap and then switch back on via the tail cap should it comeS back on in a lower mode why?
3..... If the tail cap is slightly caught is there any allowance for this because if mine is very slightly moved it turns straight off, seems to be virtually no margin between on at off?
Thanks for your assistance
2nd tiara....... As above but would hold turbo a bit longer.
3rd tiara.....Would only cycle to 2 main.
Kept tiara number one for my dad as he's unlikely to use turbo. Other two sent back to shop.
All above were tested on good batteries, in fact I went and bought some fresh ones just to double check. Shop triple checked them....they were definitely all faulty.
The flickering on my Viking pro has stopped last few times I've been out.
1....A strobe still keeps appearing and disappearing after the high main in hunting mode, but you say that it's probably has the new software or something.......so what I would like to know is am I some how activating this strobe and disabling it without knowing......not having the instructions for the new software I'm a bit in unsure if I'm doing something I'm not aware of.
2....Also if the light is on and I switch off via the tail cap and then switch back on via the tail cap should it comeS back on in a lower mode why?
3..... If the tail cap is slightly caught is there any allowance for this because if mine is very slightly moved it turns straight off, seems to be virtually no margin between on at off?
Thanks for your assistance
Last edited: