I've never measured them and don't own a Scout Light body, so I can only speculate...But nearly the same weight, width and length?
Got my First E series today
I didn't realize until I held it how great these feel in hand. I'm running the IMR-E2
-Eric
Congrats on your first E series!
I think you are set by now, eh? one M series, one P series, now an E...how about a C?
you tossed that M6? looks new to me
Out of the box, the battery compartment isn't long enough for a 17500. The boring that folks have described is to remove the driver and bore it out to a straight tube. On the older L1 bodies you could then use two cells or a 17670. The newer bodies are shorter, and if others have done it, then I guess a 17500 would fit.If I get an L1 will a 17500 cell fit?
I saw a couple of you folks say that with some boring a 17500 will fit. So, I figure lengh wise it does, but the diameter needs to be opened up a bit..
If I get an L1 will a 17500 cell fit?
I saw a couple of you folks say that with some boring a 17500 will fit. So, I figure lengh wise it does, but the diameter needs to be opened up a bit..
Out of the box, the battery compartment isn't long enough for a 17500. The boring that folks have described is to remove the driver and bore it out to a straight tube. On the older L1 bodies you could then use two cells or a 17670. The newer bodies are shorter, and if others have done it, then I guess a 17500 would fit.
If I get an L1 will a 17500 cell fit?
I saw a couple of you folks say that with some boring a 17500 will fit. So, I figure lengh wise it does, but the diameter needs to be opened up a bit..
Got my First E series today
I'm running the IMR-E2
Hmm...2xCR123 or a 17670 will not fit in the old body. I tried. it is about 15mm too short. I had to put a 17500 in it.
A 17500 is a CR123x1.5 in length.If I get an L1 will a 17500 cell fit?
I saw a couple of you folks say that with some boring a 17500 will fit. So, I figure lengh wise it does, but the diameter needs to be opened up a bit..
I've been tinkering with the cucumber option lego since my Z46 came in. Looks weird like this... hehe.
-Eric
Might be possible if you modify the head AND body? But I don't recall ever seeing one.Hmm...
A number of people have claimed to do it. Maybe they had to modifiy something else as well?