Tonight I got on a beautiful mountain along with my Zebralight Headlamp
(This is a photo of the place taken a long time ago)
I've been there many times but have never climbed on top overnight,
I went alone and I brought with me
Zebralight H602w
Zebralight H600w
Nitecore P12 Neutral withe (first use in a real hike)
Zebralight SC600w (not used)
Fenix PD35 (used only for a few seconds to make comparison with the P12 beam)
Fenix TK35 mod NW (used briefly when I arrived at the top, it was useless in the thick wood)
A good supply of 18650 batteries (not used)
The H602w has been the protagonist of the evening,
Without it would be a very difficult hike because there is not an easy path but many stones and rocks.
H602w indispensable!
For a short time I turned off the H602w to see how it would be without her.
Only with H600w or just with the P12 everything would be very complicated..
I almost always used the two Headlamp in pairs (H602w on the head - H600w around his neck)
During the most difficult points I have also turned on the Nitecore P12
Levels used:
H602w - 65 and 330 lumens (330 the most used)
H600w - 65 and 330/150 (I reprogrammed the headlamp during hike)
P12w - 210/950 (sometimes I also used the turbo for brief moments)
(used the turbo on all three torches for about a minute or two when some wild boars have passed near me)
The duration of the hike was almost four hours but it was a beautiful experience (I had to return quickly for incoming rain)
I have not used the extra batteries, returned home I checked:
H602w (AmpMax 3100 mA) 3,79 V
H600w (AmpMax 3100 mA) 3,95 v
P12 (KeepPower 2900 mA) 3,70 (approximately)
It would be nice if Zebralight sells an elastic band to use two headlamp in pairs
(Terrible translation with Google Translate)