Not the same class…There's only one official solution.
Malkoff.
The only solution is don't read and believe everything you see or hear.
Just enjoy and stop being a granpa
Not the same class…There's only one official solution.
Malkoff.
Sorry, but I'm going to cry about it as much as I feel necessary. You can always ignore me as a user if you don't like it.Guys please stop.
All the things you're crying about is what you'll never notice until you go that BLF tester route and 99% of you won't.
So in other words, you'll have a hard time to tell efficiency between first and last batch drivers.
Just get another hobby…simple…
i agree, if you're going to sell something, make it right or don't sell it... simple.Sorry, but I'm going to cry about it as much as I feel necessary. You can always ignore me as a user if you don't like it.
You know that ZL never cared about what's bothering us…i agree, if you're going to sell something, make it right or don't sell it... simple.
Nichia beats everyone again)) Have you tried installing Luminus with a small flat crystal?Welp, while you guys having breakdowns i was playing with some Zebras.
First of all, SC700d, emitter swapped with XHP70.3HI 5700K 90CRI a year ago. Wasn't happy cause Cree still covers area around die with phosporus and in 3rd gen they simply aplied white silicone. But that yellow goo still radiate yellow corona around hotspot. So after a year i partially opened it again and after some time i was licky to dice the emitter (HI by factory) with damaging center die. This is the most perfect beam of all Zebras!😀
Next was 2 x SC600 MkIV. Terrible, simply terrible beam. Although there were XHP50.3HI emitters and after dicing, Cree rainbow was still there.
After consulatations with Freeman i went with group G6 and programed it for highest output H2a. Next was indtalling 5050/3535 adapters (by Freeman) and Nichia 719.
One got 2700K and the other 5000k.
PERFECT!! SC600 reflector was originaly designed for XHP35 emitters and that size works perfect here.
Last but not least, SC600w II. Only 5050/3535 adapter with Nichia 519 installed. Instant success!
No, this is 6V model so i haven't tried anything else.Nichia beats everyone again)) Have you tried installing Luminus with a small flat crystal?
You know that ZL never cared about what's bothering us…
Of course they will repair or replace.I'll bet you a crni rižot the Zeb's gonna Repair or Replace my light, one way or the other!
I don't care if I have to get Mister Ed (he's an Attorney) on their A$$!
.
don't cry?!?Of course they will repair or replace.
Just don't be a drama queen and don't cry about it.
and yet, if i had sent only 96% of the price of a light...we have determined that Zebra built a light that is 4% less efficient than it could be..
should we Return for Refund
or
look for a battery w 4% more capacity
or
should we feel cheated, and depressed, and go get drunk to forget our imperfect Zebra? ;-)
what is your preferred method of payment?i crave efficiency its my jam that and lights that are super small compared to there output! ive heard hanks boost driver leads the pack now. but he only accpets paypal sadly
yea, i do to... one time entry into paypal, and i don't have to enter ever it again.i just like when i enter my debt card info
still may get one there on sale i care mostly about efficiency and i also prefer cooler whites. im guessing sst20 is my best option .yea, i do to... one time entry into paypal, and i don't have to enter ever it again.
Welp, while you guys having breakdowns i was playing with some Zebras.
First of all, SC700d, emitter swapped with XHP70.3HI 5700K 90CRI a year ago. Wasn't happy cause Cree still covers area around die with phosporus and in 3rd gen they simply aplied white silicone. But that yellow goo still radiate yellow corona around hotspot. So after a year i partially opened it again and after some time i was licky to dice the emitter (HI by factory) with damaging center die. This is the most perfect beam of all Zebras!😀
Next was 2 x SC600 MkIV. Terrible, simply terrible beam. Although there were XHP50.3HI emitters and after dicing, Cree rainbow was still there.
After consulatations with Freeman i went with group G6 and programed it for highest output H2a. Next was indtalling 5050/3535 adapters (by Freeman) and Nichia 719.
One got 2700K and the other 5000k.
PERFECT!! SC600 reflector was originaly designed for XHP35 emitters and that size works perfect here.
Last but not least, SC600w II. Only 5050/3535 adapter with Nichia 519 installed. Instant success!
up, never happy with emitters in any flashlight. NOT the drivers…What, your not happy with the STOCK Zebralights you got.
What are you some kind of "Cry Baby", why don't you "get another hobby". You don't think Zebralight can pic a proper LED with correct tint; Do you pee on the lens to get all the dust off too...
You must be some kind of "Grandpa" or something; "don't read and believe everything you see or hear" on the internet. "please stop" Zebra knows what they are doing, stop changing things.
Your the kind of guy "having breakdowns" of the little stuff, "please stop" Never happy with anything are you... 2700k - 5000k - 519 - 719 - diced, nothings Perfect man!!
My gosh man, "just don't be a drama queen and don't cry about it" Get your friggen light in the mail, shut your mouth and stop messing with it. Go get drunk and be happy for once in your life...
.