Tana
Flashlight Enthusiast
I confirm it is... :thumbsup:
Just put this together today. Old E2D head with domed lens and a neutral 2 stage KuKu tower drop in. Having some switch issues but working through it.
Recommend you take off the tailcap assy off the body, remove the switch/PCB board by unscrewing the retainer and add solder around the outer contact surface area. Then using isopropyl alcohol, wet the actual switch several times while cycling the switch and blow it out with pressurized air between drenchings. I had some very similar problems to yours with my FB1 bodies using modified E series heads. After many attempts to half azzed fix it I broke out the good ole multi meter and discovered the problem was contaminants inside the tiny switch. Probably solder rosin during manufacturing if I had to guess but I was not going to second guess the process. Lightknot has been very informative in assisting me AND he offers a higher amp drop in switch that users might want to consider. Cheers to a very good product and do not let my comments sway you from any of the Vital Gear bodies. My experience is just that. Mine.
Whoa! Never saw an E to Mag adapter before.
FB1 /Aleph Mule-This one is fun!
That's a nice setup you got there.