• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired XPG TOWER MODULES Multiple bins available

No photo
Sold
XPG TOWER MODULES Multiple bins available
Asking price -
Listed
N
nailbender
Member since
Description

XPG Tower Modules (TEMP OUT OF STOCK) please PM me and I can price a AW style tower module, the cores are a bit more expensive and driver options are harder but not impossible.

Built on NetKidz cores.
Shimmed for maximum Throw
The following modules available Colored XPE in Red and Green and rebel's in royal blue available
XP-G R5 flux WD tint 1 level 4-14 volts / 3 level 3.6-6 volts

XP-E R3 Flux WM tint 1 level 4 - 14 volts / 3 level 3.6-6 volts (Great throw)

XP-G R4 Flux 3C tint 3 levels 3.6 - 6 volts / 1 level 4-14 volts (5000k daylight white 75 CRI )

XP-G R2 flux 3B tint 3 levels 3.6 - 6 volts / 1 level 4-14 volts (4000k Neutral white 75 CRI )
XP-G Q5 flux 3C tint 3 levels 3.6-6 volts / 1 level 4-14 volts (3000k warm white 80 CRI)

ship with in 3 working days of paypal or PMO.
I am only offering in XPG / XPE / P4 / rebel leds at this time
4-14 volts single level
3.6-6 volts single level
3.6-6 volts 3 level
3.6-8.4 volts 3 level

SST'S do not fit on these modules no need to ask


Price for modules is $60 shipping included conus

1st class Int $5
Priority mail Int $15


Paypal info in biography or PM
Credit card users please add 4%
Please put what ordered and CPF name in paypal notes.

Please PM for money order instructions




Pictures of modules

modules.jpg
top-1.jpg



bottom-2.jpg


Beamshots

R3XPE.jpg
R35000k.jpg

XP-E R3 WM tint on left / XP-G R3 5000k on right

R24000k.jpg


XP-G R2 4000k


Thanks

Dave
Hi Dave,

"Shimmed for maximum Throw"

In which head?

Also...there's a discrepancy in the 3-level descriptions. The header says 4-14V but the descriptions say 3.6-6V.
 
XP-E R3 Flux WM tint 1 level 4 - 14 volts (Great throw)


If this will work in a KT4 Head :takeit:
 
Last edited:
Hi Dave,
This tower module is used in Surefire KT4 head, right?
BTW, the beamshot did not tell much difference of the tint.
IMHO, you could keep consistency of shutter speed, aperture, white balance and ISO setup when you take the picture.

Kif
 
I'll take one if it works for KT4 also!

XP-E R3 Flux WM tint 1 level 4 - 14 volts (Great throw)
 
cmendoza said:
Will these fit an E2e?
Click to expand...

No sorry

donn_ said:
The only way you could use one with an E2e is by using adapters to fit the E2e body to a C or M series head. It can be done, but it looks awkward.
Click to expand...

HI Donn

The beam shots were taken in a KT5 but they are great in a KT4 also. If anything they are a tighter beam in the Kt4



OscarTheDog said:
XP-E R3 Flux WM tint 1 level 4 - 14 volts (Great throw)


If this will work in a KT4 Head :takeit:
Click to expand...

It works great in a KT4 so it is yours.

Dave
Kif said:
Hi Dave,
This tower module is used in Surefire KT4 head, right?
BTW, the beamshot did not tell much difference of the tint.
IMHO, you could keep consistency of shutter speed, aperture, white balance and ISO setup when you take the picture.

Kif
Click to expand...


What you see is what you get, I have a cheap 2 megapixel set on auto. The 4000 and 5000 are much like a Q45B on steroids. The 3000 k is much more incan like, it looks like a typical high CRI led a bit on the amber side compared to the rosy side that some crees are.

joedos said:
I'll take this one

XP-E R3 Flux WM tint 1 level 4 - 14 volts (Great throw)
Click to expand...

Oscar got the one built up but I will be glad to build up another for you to ship early in the week.
 
euroken said:
I'll take one if it works for KT4 also!

XP-E R3 Flux WM tint 1 level 4 - 14 volts (Great throw)
Click to expand...


Hi

they do work great in a KT4, as posted I only built up one of each posted but will be glad to build up one for you for shipping early in the week. I will try for a beam shot in a KT4 later tonight.

Dave
 
I'll also like a XP-E R3 Flux WM tint 1 level 4 - 14 volts (Great throw).
 
I'll would also like a XP-E R3 Flux WM tint 1 level 4 - 14 volts (Great throw).

Frank

:paypal:
 
Last edited:
Hi Dave,
Sorry to ask about the noob questions:
(1)What's the correlated color temperature (CCT) of XP-G R5 flux WD tint and XP-E R3 Flux WM tint?

(2)For emitters' CCT between 4000k~5000k, which has the most flux,
XP-E R3 Flux WM tint, XP-G R3 Flux 1C tint or XP-G R2 flux 3B tint 3?

(3)Is it possible to build a module with 4-14v and 3 modes?

In the manner of fact, I am looking for mudule with most flux, around 4000k~5000k CCT, regulated, 4-14v, 3 modes (1 mode is also accepted). Any suggestion?:bow:
I guess I ask too much :ohgeez:
Thanks a lot~

Kif
 
:takeit:

XP-G R5 flux WD tint 1 level 4-14 volts

XP-E R3 Flux WM tint 1 level 4 - 14 volts (Great throw)

XP-G Q5 flux 3C tint 3 levels 3.6-6 volts (3000k warm white 80 CRI)

Thank you very much.
E-J-J
 
Kif said:
Hi Dave,
Sorry to ask about the noob questions:
(1)What's the correlated color temperature (CCT) of XP-G R5 flux WD tint and XP-E R3 Flux WM tint?

http://www.cree.com/products/pdf/XLampXP_B&L.pdf

This should give you what you want. I don't know the CCT of those two if I had to guess I would say the XPE WM as WD is closer to 65oo. The chart should tell you what you need to know.



(2)For emitters' CCT between 4000k~5000k, which has the most flux,
XP-E R3 Flux WM tint, XP-G R3 Flux 1C tint or XP-G R2 flux 3B tint 3?

I don't understand what you are asking they are listed by flux as you can see the highest flux are the 2 R3 that you have listed. I don't think you asked what you really want but hopefully you can find it in the binning charts. That chart covers all XP series. These are plain listed by flux, the R3 XPE is cool white as is the R5 the rest are listed by flux and color temp so I am not sure what you are after. :D

(3)Is it possible to build a module with 4-14v and 3 modes?

In the manner of fact, I am looking for mudule with most flux, around 4000k~5000k CCT, regulated, 4-14v, 3 modes (1 mode is also accepted). Any suggestion?:bow:

No levels are in 6 volts max.

I guess I ask too much :ohgeez:
Thanks a lot~

Kif
Click to expand...

ninemm said:
Quick question. Will this work in a stock M4? Thanks!
Click to expand...

If you are talking about a Z46 non turbo head then no they will not work in those but my D36 modules will work but have to be installed from bezel end.

If you mean the M4 turbo which is a KT4 then yes but not the one that also goes on M3 as that is a Z46 i believe.


E-J-J said:
:takeit:

XP-G R5 flux WD tint 1 level 4-14 volts

XP-E R3 Flux WM tint 1 level 4 - 14 volts (Great throw)

XP-G Q5 flux 3C tint 3 levels 3.6-6 volts (3000k warm white 80 CRI)

Thank you very much.
E-J-J
Click to expand...

Thanks that is not a problem, I had one of each built so all but the R3 are built and I will have it ready to go on Monday or Tuesday. The other two are yours

Dave
 
Hi All

I only built one of each of these modules to test the waters. I will gladly build up more and should be able to ship within three working days of Paypal or Money Order.

SST series leds will not fit no need to ask.

At this time I will use XPE/ XPG in bins and temps offered above.
I will consider P4 which I stock in most temps but please PM for those details.

I also am only offering in the following drivers and that is all.

1 level 4-14 volts
1 level 3.6-6 volts

3 levels 3.6-6 volts

I have these drivers stocked and should fit most circumstances.

Thanks and have a great weekend

Dave
 
:paypal:

XP-G R5 flux WD tint 1 level 4-14 volts
XP-G Q5 flux 3C tint 3 levels 3.6-6 volts (3000k warm white 80 CRI)

The above-mentioned order, please.
E-J-J
 
Last edited:
:paypal: as discussed in PM
:twothumbs:twothumbs:twothumbs:twothumbs:twothumbs
 
You must log in or register to reply here.

Latest posts

Back
Top