Cordless power tools

Gather App
Candle Power Forums

Help Support Candle Power:

+

For power tools, nothing beats the satisfaction of using a cut-off wheel
and I didn't even loop in 'orifice' in that sentence :p
 
For cutting metal, I was always a fan of the 12 volt one handed Milwaukee bandsaw (had the little one before brushless was available). Just large enough to cut deep strut, great for Allthread and EMT, and the occasional hardened padlock when your boss can’t find the keys to unlock all the equipment to get everyone working in the morning. Saves your arms from all the vibrations of a Sawzall and is much safer too. Less filing required on strut and Allthread. The baby bandsaw has the blade enclosed so it doesn’t snap and try to take out your leg like the larger ones do when the blade breaks.
 
+

A bit over a year ago, picked up a brushless rotary tool from Milwaukee.
Got it for a really specific job.

Couple days ago I was trying to disconnect my main solar connectors (these are connected to near 1100w of panels)
and I couldn't get the damn negative connector apart... these are mc4 connectors
Eveeeeentually got them apart.

Thought maybe the plastic deformed from the amperage, so took an educated guess and grabbed my Milwaukee rotary tool.
I already had a bit on it that would work and proceeded to sand off some plastic material on the connector.
Was just sitting on my couch, not needing to be next to an outlet ect.. and it worked perfectly.
Didn't have to cut off and put a new mc4 on.

So, it's great when you have a tool that works exactly as needed and is neeto to boot:cool:

got two 3Ah ~ M12 batteries for very cheap
and btw, its this model and the rpms' can go VERY high:::::

https://www.homedepot.com/p/Milwauk...tary-Tool-Tool-Only-2525-20/326190804#overlay
 
Already got a sweet deal from HD online for 2 batteries with charger, and my choice of a free tool. Went with the $79.oo Ryobi battery-powered Multi-tool. I wanted extra batts., and a back-up charger in case my first one craps out on me. Figured since they're offering a free power-tool, might as well graciously take them up on their offer. :grin2:

Also, picked up the Ryobi 150-Watt Power source (inverter).

Might seem like a waste of money, but think about it.... You run a Power station until it's out of juice. Now it's a heavy, useless brick until you can recharge it. You can get a much bigger Power station ~or~ A Ryobi power source that will keep working indefinitely depending on how many fully charged spare batteries you have to feed it. I went with both!
 
...Did someone say tools that go *BRRRT*? :clap:

I think my collection is nearing completion (and yes, I have more bit sets and measuring tapes than pictured here - I just didn't bother go find them all ^^).
- 2x DCF601
- DCD991
- DCD999 (recent DCD991 replacement)
- DCF922 ( I LOVE THIS TOOL!!!)
- DCF899

IMG_1728_.jpg

For batteries, I have
2x 18 V XR 5 Ah
2x 18 V PowerStack 1,7 Ah
4x 12 V XR 2 Ah

And 2x DCB112 and 1x DCB115 chargers.

1x 18 / 54 V FlexVolt 9 Ah is TBA, as I need one.


Arguably quite the upgrade from my previous collection.

IMG_0818_.jpg
 
Last edited:
orbital said:
+

A bit over a year ago, picked up a brushless rotary tool from Milwaukee.
Got it for a really specific job.

Couple days ago I was trying to disconnect my main solar connectors (these are connected to near 1100w of panels)
and I couldn't get the damn negative connector apart... these are mc4 connectors
Eveeeeentually got them apart.

Thought maybe the plastic deformed from the amperage, so took an educated guess and grabbed my Milwaukee rotary tool.
I already had a bit on it that would work and proceeded to sand off some plastic material on the connector.
Was just sitting on my couch, not needing to be next to an outlet ect.. and it worked perfectly.
Didn't have to cut off and put a new mc4 on.

So, it's great when you have a tool that works exactly as needed and is neeto to boot:cool:

got two 3Ah ~ M12 batteries for very cheap
and btw, its this model and the rpms' can go VERY high:::::

https://www.homedepot.com/p/Milwauk...tary-Tool-Tool-Only-2525-20/326190804#overlay
Click to expand...
On jobs I need a rotary tool, I just chuck a rotary rasp bit into my 12 volt Milwaukee Impact Driver.
 
If you're looking for a reliable 1/4" or 3/8" impact driver, Ryobi or Craftsman might be a better choice. They're more affordable than the pro brands but still perform well for most DIY and light professional jobs. Black and Decker can be hit or miss—it's fine for light work, but it might struggle if you push it hard.
 
visivopro said:
If you're looking for a reliable 1/4" or 3/8" impact driver, Ryobi or Craftsman might be a better choice. They're more affordable than the pro brands but still perform well for most DIY and light professional jobs. Black and Decker can be hit or miss—it's fine for light work, but it might struggle if you push it hard.
Click to expand...
visivopro said:
If you're looking for a reliable 1/4" or 3/8" impact driver, Ryobi or Craftsman might be a better choice. They're more affordable than the pro brands but still perform well for most DIY and light professional jobs. Black and Decker can be hit or miss—it's fine for light work, but it might struggle if you push it hard.
Click to expand...
 
I bought a Black and Decker drill driver 10 years ago. It came with only one 12-volt battery. That battery is still working today just a strong as it did the day I bought it
 
With the below freezing weather, my dashboard lit up announcing low tire pressure, and a warning to inflate them to 36 psi. I stopped at one gas station and there was a line of 5 cars waiting to put air in their tires. I stopped at another and the machine only took quarters - 6 of them!

I added this today to my small collection of Ryobi tools.
1734310495589.png
 
Curious if anyone took advantage of the Holiday sales so far. I'm saving up funds for a new watch, so only took advantage of one deal at Home Depot. Buy two Ryobi batteries and a fast-charger, get a free tool from a decent-sized list of options. I went with the Ryobi multi-tool. Get me a couple of Diablo attachments for it. I'll be able to easily cut through protruding nails. And, cut through some other stuff as well. I know guys who wait until the Holidays to buy new Ryobi tools. Waiting for those sales.
 
Monocrom said:
Curious if anyone took advantage of the Holiday sales so far. I'm saving up funds for a new watch, so only took advantage of one deal at Home Depot. Buy two Ryobi batteries and a fast-charger, get a free tool from a decent-sized list of options. I went with the Ryobi multi-tool. Get me aThe tire inflator couple of Diablo attachments for it. I'll be able to easily cut through protruding nails. And, cut through some other stuff as well. I know guys who wait until the Holidays to buy new Ryobi tools. Waiting for those sales.
Click to expand...
The tire inflator I bought was on sale for $29, originally $39, but it still rung up at the Black Friday sale price of $24.

Not this year, but in the past I have waited for Thanksgiving or Christmas sales to buy extra batteries. In particular the 18v 4Ah batteries were $99 but during the sales, they were 2 for $99.
I haven't checked the prices this year, because I don't need any more.
 
I got the Milwaukee M18 Tire Inflator for $200 with 2 6- Ah batteries and a charger..The charger and batteries are $ 200 by them selves.. Bought at HD during Black Friday event.. It’s a great tool…
Butch
 
You must log in or register to reply here.

Latest posts

Back
Top