tab665
Flashlight Enthusiast
is there any chance that there will be any black non-crenelated bezels ready for the next batch of wasp heads?
You can become a Supporting Member.
I'm waiting for an incan-like 2900-3500k tinted version dedomed or with XPL-HI for some throw! Actually, I've been waiting for something like this since I posted in late 2012!
is there any chance that there will be any black non-crenelated bezels ready for the next batch of wasp heads?
Any idea when the next run will be ready?
do these heads have "stretch" runtime programmed allready as the default setting? ive been trying to keep up with all the info between the two threads, so i apologize if this questions been asked and i missed it.
Ok, faster user switching is now set slower, about .35 (vs .25 originally)
Would it be possible to get the faster mode switching back?
Default is 0.65
0.35 is built into the top of the LOAD menu. Are you asking for 0.25?
I have not tried .35, I didn't see it an an option when programming.
Thanks! This driver is amazing, thanks for all your help with programming :twothumbsWhen you click the down arrow and then LOAD, do you see the yellow text at the top?:
You have to make an account, it's free and takes a few seconds.I get " public you cannot edit it". What am I doing wrong?
You have to make an account, it's free and takes a few seconds.
you cannot edit public templates (like temperature or switch adjustment). To modify a "protected" parameter you need to apply the public template first and then your program. After programming a public template the light starts with programming mode asking to apply a user program.
In a nutshell, you change the temperature to a cooler value, you need:
1) Load "55C temperature cutoff" template and program it. It changes the temperature cutoff value in the protected section but it also cleans up all modes. So when you switch your light on, it starts with programming
2) Open or create a custom program. And program it over the template. User programs have no access to the protected section so the programmed temperature cutoff remains with no change.
If you need to return to factory values - load the factory template and then apply your custom program over it.
Hope that helps