Vinz
Newly Enlightened
Hi, folks!
Sorry for the late reply! But I spent all my free time into the high quality "Mjölnir" super thrower project, which will be revealed here on CPF in a few weeks. :devil:
Yes, the XM-L2 have to be de-domed to fit the triple carclo optics.
Not yet. But should be easily possible. I've only "reshaped" some older 6P and reduced them slightly in size to get jacket suitable but still reliable tactical flashlights. I tested on one of them a black DLC 4000 coating, with 3000HV and a COF same as Teflon (PTFE). It was the best coating on a Flashlight I've ever seen. But it was also very tricky to get the contact area in the head clean again.:ironic:
BTW, following a few pictures of my latest High-CRI "Mule" drop-in, with a high optical grade lens onto the original dome that collects almost all the light coming from the LED.
Same as above, just with flash to show how the surface of an unused drop-in looks like.
Different drop-in with blue GITD around the LED.
Regards,
Vinz
Sorry for the late reply! But I spent all my free time into the high quality "Mjölnir" super thrower project, which will be revealed here on CPF in a few weeks. :devil:
I assume that the XM-L triple uses the standard XP-G Carclo optic and the XM-Ls are de-domed to fit under it?
Have you ever looked into boring out a 6Ps head to match it to the Solarforce drop-in cavity? I've been waiting get hold of an old knackered Surefire host to try it out on.
I personally really like the Solarforce hosts and the quality of them but we all like the Surefires as well and if there was a mod to give them greater function then that can only be a good thing.
Yes, the XM-L2 have to be de-domed to fit the triple carclo optics.
Not yet. But should be easily possible. I've only "reshaped" some older 6P and reduced them slightly in size to get jacket suitable but still reliable tactical flashlights. I tested on one of them a black DLC 4000 coating, with 3000HV and a COF same as Teflon (PTFE). It was the best coating on a Flashlight I've ever seen. But it was also very tricky to get the contact area in the head clean again.:ironic:
9 amps with the XM-L and 7 amps with the XM-L2. Output is around the same.also, what is the drive current for the triple XML2
I should have finished some more at the end of this year and will make some pictures then. I'll make at least one with a aspherical lens in the front. The max current is 7A.I think we need to see some photos of these hepta mules
A hard driven XM-L2 and a 25.5mm plain TIR could fit your needs. I should have time for such custom projects in around 3-4 months. But only if no one is interested in "Mjölnir".Vinz, Can you do a single with a tightly focused beam that will fit in my Surefire M2? I'm looking for a single ultra-high output drop-in that will have very little spill - imagine a cone of light where things not in the cone stay in the dark.
BTW, following a few pictures of my latest High-CRI "Mule" drop-in, with a high optical grade lens onto the original dome that collects almost all the light coming from the LED.
Same as above, just with flash to show how the surface of an unused drop-in looks like.
Different drop-in with blue GITD around the LED.
Regards,
Vinz