Tana
Flashlight Enthusiast
Well... this has been on a list for a while but I guess it's about time to put it out for those interested...
Tana eMt1 module for Surefire M1 IR Illuminator
Beam profile is very similar to my Reflector mod (based on KX1/KX2 e-series heads) but due to narrowing just under the lens, some light is blocked in the process... it's still a beautiful beam profile (I'm a sucker with taking beam-shots)...
As all my mods, it can be ordered with different LEDs and driver setups...
Prices:
$78 eMt1 Nichia 219B 2.8-6V 1.4Amps Custom Modes (Best Neutral White and Color Rendition)
$78 eMt1 CREE XPG2 2.8-6V 1.4Amps Custom Modes (max output)
$78 eMt1 CREE XPE2 2.8-6V 1.4Amps Custom Modes (max throw)
(one set of modes, 2/3/4 modes per wish, with or without memory, optimized for single li-ion cell)
Can be ordered with different driver as well... Boost driver optimized for 3V (single CR123) with pre-set Low/Med/High with Memory is extra $12... also, above driver flashed by German genius with his MumboJumbo (fully programmable) driver is extra $12...
This is a module - you need to open your M1 (heat up the bezel, use some strap wrenches to unscrew then clean up threads from threadlock), remove stock IR module, IR lens/filter and fat o-ring from the bezel then install this module - no modification needed for the host so no need shipping my way... Since the M1 host remains stock, it's easy to remove the module and convert back to stock IR setup...
And now, the photos:
Tana eMt1 module for Surefire M1 IR Illuminator
Beam profile is very similar to my Reflector mod (based on KX1/KX2 e-series heads) but due to narrowing just under the lens, some light is blocked in the process... it's still a beautiful beam profile (I'm a sucker with taking beam-shots)...
As all my mods, it can be ordered with different LEDs and driver setups...
Prices:
$78 eMt1 Nichia 219B 2.8-6V 1.4Amps Custom Modes (Best Neutral White and Color Rendition)
$78 eMt1 CREE XPG2 2.8-6V 1.4Amps Custom Modes (max output)
$78 eMt1 CREE XPE2 2.8-6V 1.4Amps Custom Modes (max throw)
(one set of modes, 2/3/4 modes per wish, with or without memory, optimized for single li-ion cell)
Can be ordered with different driver as well... Boost driver optimized for 3V (single CR123) with pre-set Low/Med/High with Memory is extra $12... also, above driver flashed by German genius with his MumboJumbo (fully programmable) driver is extra $12...
This is a module - you need to open your M1 (heat up the bezel, use some strap wrenches to unscrew then clean up threads from threadlock), remove stock IR module, IR lens/filter and fat o-ring from the bezel then install this module - no modification needed for the host so no need shipping my way... Since the M1 host remains stock, it's easy to remove the module and convert back to stock IR setup...
And now, the photos:
Last edited: