What LED flashlight is sitting on your nightstand?

[richbuff]

Current coffee table alongside my bed lineup: MF05, MT90vn, HK90vn, HK90, 2 x GT94, KR1vn90, K75vn, D4V2vn W2, FW4vn W2, D18vn W2, FW21Pro vn, NSX53vn, TM9Kvn, EC03, MS03vn, R90TSvn and MS18vn.

 

[richbuff]

Ok, time for the pic. Instead of editing my previous post, a new post. Yay!

34 lights are Vinh54, and 11 are stock, for 45 lights. 29 A list lights are pictured, 16 B list lights are not pictured.

 

[desmobob]

Ok, time for the pic. Instead of editing my previous post, a new post. Yay!

34 lights are Vinh54, and 11 are stock, for 45 lights. 29 A list lights are pictured, 16 B list lights are not pictured.

Nice, but what do you have for back-up? :thumbsup:

 

[Katherine Alicia]

on my night stand (bedside table) I have a 4x18650 4 led Skyray King in gold, a 2xC cell incan as a backup light if a bulb goes in my night time reading light (both a bit dusty) and my D4V2 with a diffuser on it glowing in pink right now, I have my Manker E02 clipped onto my night shirt, and a 6D maglite on the floor leaning against my night stand, my Manker T02 on the bed next to me glowing away nicely

 

[Beamhead]

SR-51, M40A, Turbo X, E8 Caveman and a TLR-3 riding my 226R.

 

[Olumin]

For over two years a G2X MV, and lately a 6P.

 

[Jean-Luc Descarte]

An S2+ 219C. Its lowest mode doesn't take away my sleep when used in bed, unlike everything else in the collection with a battery inside.

 

[blah9]

For many years it was a Fenix TK09 2015 edition, but I recently upgraded to a Fenix TK11 TAC. Wasn't sure I'd be happy with the worse output regulation and different user interface, but it turns out I am.

 

[parang]

Right now, it is the Olight i5T Cu (copper).

 

[Stress_Test]

On my well-used Blue Angels mouse pad :laughing:

Quark warm Hi-CRI in 2AA format, and Fenix TK11, R2 edition.

The Quark is the "pro" version that starts in moonlight mode; I use that going to bed and waking up. Keeps from hurting my eyes and waking me up too much in the middle of the night.

The TK11 was my first 18650 light; I carried it and used it quite a bit, then retired it to emergency standby use with 2 primary 123As. This thread reminded me to do a function check on that light and make sure it could still run in high mode without the batteries cratering.

Standby/emergency lights ought to be checked periodically, same as fire alarms and extinguishers. I tend to go too long between checks because I just lose track of how much time has gone by!

 

[Lateck]

A Olight S1R Baton II has been my go to night light for a couple of years. Just ordered a new one to have as a backup.
I am a big Olight fan.

 

[bykfixer]

I keep a 2am low output number for those occasional nature calls like a Sofirm C01 and now the Elzetta aa edc.
I also keep a "next sound you'll hear is POW" SureFire EB1c burglar blinder just in case……

 

[Havok]

A C01R, Q8, and a TK22UE.

 

[mickb]

fenix e01( 13 lumens model) which is on my car key chain.

 

[lion504]

HDS F89HG Rotary. Most functional handheld light I own. Use the locator flash and moonlight modes daily.

And a BLF LT1: ramping, Samsung HiCRI LEDs, and oft-used candlemode for mood lighting.

 

[Hugh Johnson]

In rotation:
-Thrunite Ti5 for 0.04 lumens. Lower would be better.
-Sofirn c01 red emitter. Multi-mode edition with sublumen.
-Thrunite Archer 1a v3

Additionally, Sofirn C01 3,200k or 3,400k for getting to/from the bedroom and night and morning. They're too bright to use in the bedroom and turn it on once up and about.

 

[Vemice]

Don't use it much but there when needed; the Jetbeam RRt-01 Rotary for true sub-lumen output.

 

[seery]

Acebeam X70

 

[dmattaponi]

Since 2016, a Thrunite TN4A has been my nightstand light. Usually my pocket edc Thrunite T10II gets set on the nightstand before bed too.


Sent from my iPad using Tapatalk

 

[ledbetter]

Franz Labs lil nugget. Almost infinite settings is great for stumbling around, mood lighting, and search and destroy. But have an old sure fire 6p with a customlites drop in just in case.