Jetbeam RRT01vn - The Best EDC R

[Skylumen]

What a hot seller.

 

[noboneshotdog]

I heard that some are putting in Nichia Optisolis led. Supposed to be super high cri. Any chance of this option? I think it could be a hot selling option.

I would buy one in a heartbeat.

 

[Tejasandre]

What a hot seller.

It's cool light with an ugly stock led. Perfect candidate for a Vinh massage.

 

[Skylumen]

I heard that some are putting in Nichia Optisolis led. Supposed to be super high cri. Any chance of this option? I think it could be a hot selling option.

I would buy one in a heartbeat.

Link 2 LED?

 

[Skylumen]

It's cool light with an ugly stock led. Perfect candidate for a Vinh massage.

The stock samples I had was mixed. Some are nice white some r green. 1 was a bit purple.

 

[Tejasandre]

The stock samples I had was mixed. Some are nice white some r green. 1 was a bit purple.

I have green luck. So I waited for you.

 

[twistedraven]

Nichia Optisolis is extremely picky about what optics it needs to be in. It makes for horrible beam quality unless on specific frosted optics that are floody (30 degrees or higher). It also is quite low in output-- 80-140 lumens per emitter.

Nichia E21A or Luminus SST20 95cri is far easier to work with.

 

[SKV89]

The 219B from ROT66 is legit 219b 4500k 9080. It jas the legendary below BBL tint. If you test them side by side with the 4000k sst20 or 219C, the 219B will make them look very green.

 

[twistedraven]

Nothing a filter can't fix.

 

[neutralwhite]

wow, nice Vinh, and YT Review man!.

can these take Unprotected 1200mAh flat tops?

not sure if Keepower make a 1200Mah Protected.


thanks.

 

[xevious]

Very nice range of LED options presented.
Is there a write-up anywhere that provides some useful details about each of the emitters with beam shot examples?
XPL HI 4000K
XPL HD 4000K
XPL HI 5000K
XPL HD 5000K
XPL HD 6500K
SST20 3000K 95CRI
SST20 4000K 95CRI

[STRIKE]Also, with the triple 2mmx12mm trits option, does that mean tritium vials installed in place of an LED emitter? Because the rear sure looks like it takes 6mm trits.[/STRIKE]

 

[Rasher]

Also, with the triple 2mmx12mm trits option, does that mean tritium vials installed in place of an LED emitter? Because the rear sure looks like it takes 6mm trits.

They are 12mm...

 

[xevious]

They are 12mm...

OK, thanks. Now I get it. When selecting options, it wasn't possible to select more than one at a time. So I thought the emitter choice and vial options were mutually exclusive. It appears that you have to do "add to cart" separately.

 

[Skylumen]

1 last RRT01vn for Batch 3 which should be here in about 8-10 days.

 

[gunga]

You sure it fits 12mm trits? I read it did not.

 

[neutralwhite]

thanks Vinh....
how do I get Trits in this?, might need pure white to compliment White1.
thanks.

 

[Skylumen]

You sure it fits 12mm trits? I read it did not.

Thats not good. I have 12mm trits here but I dont have the light. Its alright I can always order more trits.

 

[neutralwhite]

Gunga, you having Trits Installed ?.

Thats not good. I have 12mm trits here but I dont have the light. Its alright I can always order more trits.

 

[Skylumen]

Gunga, you having Trits Installed ?.

Yes I send it in to get installation. I don't do them myself.

 

[xevious]

You sure it fits 12mm trits? I read it did not.

I wonder if this is some limited release to test for interest or something. Jetbeam's main site doesn't show it. I was looking to see if they had some specifications. None of the other sites even bother to say that the tritium slots exist... but they're present in the photos. I'm wondering if Jetbeam did those as a design and didn't intentionally make them for trits?