precisionworks
Flashaholic
A friend has a Rockwell Horizontal Mill for sale, similar to the photo below
Location is Zigler IL (Southern Illinois). Asking $1000
Location is Zigler IL (Southern Illinois). Asking $1000
Materials/Mechanical/Machining Specific Deals
- Thread starter Unforgiven
- Start date
Help Support Candle Power Flashlight Forum
precisionworks
Flashaholic
For someone looking for a nice lathe near St Louis, there's a 14"x40" gap bed at a good price. Comes with 3 & 4 jaw chucks, steady, follower, etc. and taper attachment.
New retail is $8990 for lathe + $1000 for the taper = $9990
He wants $4500 for the machine. Not a light weight lathe at 4100#, with a 5 hp spindle & 2" head stock bore ... but pretty nice. I've seen the machine & would buy it myself but my job is less than secure.
http://www.usindustrial.com/pdffiles/lathes/US1440.pdf
Almost forgot ... this machine has a 2-axis DRO
New retail is $8990 for lathe + $1000 for the taper = $9990
He wants $4500 for the machine. Not a light weight lathe at 4100#, with a 5 hp spindle & 2" head stock bore ... but pretty nice. I've seen the machine & would buy it myself but my job is less than secure.
http://www.usindustrial.com/pdffiles/lathes/US1440.pdf
Almost forgot ... this machine has a 2-axis DRO
Last edited:
wquiles
Flashaholic
From one of my email subscriptions - I have no relationship to this person:
*************************************************************************************
Bridgeport milling machine with a 48" resurfaced table."Church mouse" quiet 2 HP 2J head, rescraped knee ways. New way wipers. New X and Y lead screws and nuts,fine feed hand wheel,draw bar, collet rack with collets.work light, vise,and PPG 2 part urethane paint.
$3750.00
John Fahnestock
J&L Scraping Service
www.j-lscraping. com
508 892-4856
*************************************************************************************
Bridgeport milling machine with a 48" resurfaced table."Church mouse" quiet 2 HP 2J head, rescraped knee ways. New way wipers. New X and Y lead screws and nuts,fine feed hand wheel,draw bar, collet rack with collets.work light, vise,and PPG 2 part urethane paint.
$3750.00
John Fahnestock
J&L Scraping Service
www.j-lscraping. com
508 892-4856
wquiles
Flashaholic
MSC had the Aloris BXA size 5C Collet holder at almost half price (ordered as part# KL68026467) for $115.75. Plus you can get anything on MSC with free shipping on orders over $99 (code WEBFF).
Will
Will
precisionworks
Flashaholic
Will -
Once you see how nice the Aloris holders are, you'll throw rocks at everything else. Send them to me so you won't be tempted
Once you see how nice the Aloris holders are, you'll throw rocks at everything else. Send them to me so you won't be tempted
wquiles
Flashaholic
Will -
Once you see how nice the Aloris holders are, you'll throw rocks at everything else. Send them to me so you won't be tempted
I am pretty impressed, in fact I ordered a second one of those last night to use with my new solid carbide 7/8" boring bar :devil:
These inserts are a pretty good deal if you can use them:
http://www.carbidedepot.com/detail.aspx?ID=28278
http://www.carbidedepot.com/detail.aspx?ID=28278
PEU
Flashlight Enthusiast
Complete factory liquidation, Online auction, closes today, for ppl near TN: http://bid.mclemoreauction.com/cgi-bin/mndetails.cgi?mclemore19
Interesting machines, storage and tools (for the vise nuts I saw a kurt 675 there, current bid around $150)
Happy bidding
Pablo
Interesting machines, storage and tools (for the vise nuts I saw a kurt 675 there, current bid around $150)
Happy bidding
Pablo
precisionworks
Flashaholic
There are (surprisingly) some killer deals on grainger.com
Click on Today's Features
Click on Clearance Center
Click on Machining
Click on Indexable Tools (or any other category of interest)
I just purchased a 2.5" RTW 45 degree face mill ... for ... $82.98 + tax
Free shipping if you order online with a credit card or pay with your Grainger open account.
There are two left in the entire USA - better hurry
http://www.grainger.com/Grainger/items/2CUH4?Pid=search
Click on Today's Features
Click on Clearance Center
Click on Machining
Click on Indexable Tools (or any other category of interest)
I just purchased a 2.5" RTW 45 degree face mill ... for ... $82.98 + tax
Free shipping if you order online with a credit card or pay with your Grainger open account.
There are two left in the entire USA - better hurry
http://www.grainger.com/Grainger/items/2CUH4?Pid=search
precisionworks
Flashaholic
I stumbled onto a clearance page from Tyson Tool in Ontario Canada http://www.tysontool.com/ClearanceItems071509.pdf
They cannot sell directly to USA customers, and they referred me to Rani Tool in Newington, CT (888-554-RANI). I was connected to Vic who has over 30 years experience in tooling & insert sales. He sold me 16 inserts (SEWH43 AlTiN coated, made in Austria) for $4.99 each
They just last week opened an eBay store & have some very nice indexable end mills listed - a 1" cut with 3/4" shank is $99 including 10 APKT inserts
http://cgi.ebay.com/1-indexable-ins...emQQptZLH_DefaultDomain_0?hash=item23037c7cfa
They cannot sell directly to USA customers, and they referred me to Rani Tool in Newington, CT (888-554-RANI). I was connected to Vic who has over 30 years experience in tooling & insert sales. He sold me 16 inserts (SEWH43 AlTiN coated, made in Austria) for $4.99 each
They just last week opened an eBay store & have some very nice indexable end mills listed - a 1" cut with 3/4" shank is $99 including 10 APKT inserts
http://cgi.ebay.com/1-indexable-ins...emQQptZLH_DefaultDomain_0?hash=item23037c7cfa
precisionworks
Flashaholic
Bridgeport mill in Los Angeles
http://www.practicalmachinist.com/vb/showthread.php/fs-bridgeport-vari-speed-191188.html
A pretty decent buy for $650
http://www.practicalmachinist.com/vb/showthread.php/fs-bridgeport-vari-speed-191188.html
A pretty decent buy for $650
Luminus Devices SST-90
Avnet has 300+ of GN200 sort devices in stock for $41.67 ea. 1-25 pieces.
This is there highest sort. Here is a link:
[SIZE=+1]http://tinyurl.com/SST90[/SIZE]
Avnet has 300+ of GN200 sort devices in stock for $41.67 ea. 1-25 pieces.
This is there highest sort. Here is a link:
[SIZE=+1]http://tinyurl.com/SST90[/SIZE]
PEU
Flashlight Enthusiast
precisionworks
Flashaholic
Johnson Cutting Tools (248-442-9482) is clearing out quite a few thousand inserts ... $1.95 each ...CCMT, CNMA, CNMG, CNMP, SNMG, TNMG, WNMG, ETC. Call for quantities available or ask him to fax his "blowout sheet"
precisionworks
Flashaholic
FREE SHIPPING on your next MSC order over $25
Use code MR1109FF
Expires 12-14-09
Use code MR1109FF
Expires 12-14-09
25% off + free ground shipping for orders over $199, expires 11/25/09. THANKSW
Travers' Overstock page: https://www.travers.com/overstock/
22-025-431 T&O CNMG 431 C2 CARBIDE INSERT $0.87
Minimum 10 but still under $9
Ends 11/30/2009
22-025-431 T&O CNMG 431 C2 CARBIDE INSERT $0.87
Minimum 10 but still under $9
Ends 11/30/2009
Last edited:
PhotonFanatic
Flashlight Enthusiast
wquiles
Flashaholic
Re: Half-price sale on Micro 100 carbide tooling
Thanks Fred. By the way, I did call them, and got to talk to the owner, Kevin. Extremely helpful, and willing to help with anything we need for machining. I ordered a few Micro 100 pieces as well
Will
Thanks Fred. By the way, I did call them, and got to talk to the owner, Kevin. Extremely helpful, and willing to help with anything we need for machining. I ordered a few Micro 100 pieces as well
Will
PEU
Flashlight Enthusiast
Re: Half-price sale on Micro 100 carbide tooling
Galco Clearance sale: http://www.galco.com/email-webversion-december.htm?source=emailnews200912
ABB VFDs and other stuff too.
Pablo
Galco Clearance sale: http://www.galco.com/email-webversion-december.htm?source=emailnews200912
ABB VFDs and other stuff too.
Pablo
