As I see it, it would be fine to have a 3" TH for the M6 and a smaller one for the C-series, all with optimum heatsinking capabilities of course
Ideally, for me they should have following specs:
The 3" TH for M6 should of course incorporate the Luminus SST-90 LED, preferably with high CRI and not too high a color temperature (NO 6500K please, please!!) It should have an M-thread of course.
It should operate, like the current P7 model, from 6V to 13V for a regulated output, that's just excellent already. Of course, it should have 3 modes, one of which should unveil the full 2000+ Lumens of this awesome LED
That's the LED-side. Now back to incans... a 3" TH with the ability to take MN2X lamp assemblies and the like... UEBERCOOL! I would buy one IMMEDIATELY as our good fellow FiveMega ran out of his one.
For the C-series, I can imagine a smaller TH (something in the region of 1.5") with a Luminus SST-50 LED. If possible, it should have a driver that is capable of both bucking and boosting, so it will accept 3V to 13V for a regulated output. Everything else the same as above, but with C-thread.
For the incans, please make the same one, but make it so, it can accept MN2X lamps (so NOT the MN10 and MN11, choice is much wider in the MN20-style) and I would be happy.
Any chance, Mark??
I will check this thread more often, highly interesting!
Timmo.