markr6
Flashaholic
- Joined
- Jul 16, 2012
- Messages
- 9,258
As you can see below, except for the H modes, the SC52 and SC600 output levels are similar (most folks couldn't distinguish between them). But the H on the SC600 modes are SO much higher the M an L modes seem a lot lower in comparison. I'm not really complaining. Having one light that can go from .01 to 1100 ANSI lumens is pretty fantastic.
SC52 Light Output
High: H1 280 Lm (0.9 hrs) or H2 172 Lm (1.7 hrs) / 108 Lm (3 hrs) / 4Hz Strobe
Medium: M1 50 Lm (7.5 hrs) or M2 25 Lm (12 hrs) / 12 Lm (27 hrs)
Low: L1 2.7 Lm (4 days) or L2 0.34 Lm (3 weeks) / 0.06 Lm (2 months) / 0.01 Lm (3 months)
SC600 MkII L2 Light Output
High: H1 1100 Lm (PID, approx 2 hr) or H2 670 Lm (PID, approx 2.5 hrs) / 356 Lm (3.9 hrs) / 162 Lm (11 hrs)
Medium: M1 70 Lm (30 hrs) or M2 32 Lm (66 hrs) / 12 Lm (172 hrs)
Low: L1 3.8 Lm (16 days) or L2 0.43 Lm (2.5 months) / 0.06 Lm (4.6 months) / 0.01 Lm (5.5 months)
Looks pretty good to me! I'll probably set H2 at 356 lumens for a nice, well-rounded do-it-all light. I see this one getting a lot of use!