HDS Systems EDC: Suggestions #1

[Random Dan]

I think a loop over type two-way clip that attaches to the bezel, either with screws or sandwich method, would be ideal. Just please make it so that the new bezel and clip can be retrofitted to older bodies for those of us who have HDS lights we really like and want to add clips to, not replace the whole light with a new model.

 

[jon_slider]

I think a loop over type two-way clip that attaches to the bezel, either with screws or sandwich method, would be ideal.

do you mean you would like a 2 way clip that allows bezel down carry, like the one on this Legacy Clickie, except attached to the bezel, and not touching the tailcap on a Rotary?:
(pic is a link)

 

[Random Dan]

do you mean you would like a 2 way clip like the one on this Legacy Clickie, except screwed to the bezel?:

Yes indeed. Something like that but attaches to the bezel. Actually that exact design I think is the best solution, but it seems unlikely that the body holes would come back and even if they do that still leaves my current rotaries in the lurch. I wouldn't mind buying a few new clip attachment bezels though to put on my older lights.

 

[thermal guy]

do you mean you would like a 2 way clip that allows bezel down carry, like the one on this Legacy Clickie, except attached to the bezel, and not touching the tailcap on a Rotary?:
(pic is a link)

Now you see!! What is wrong with that ??? That's is awesome

 

[Hogokansatsukan]

More than likely, what you see is a new clip section, very much like the clip above, that is on the Universal clip... Hopefully seen in 2019.

 

[thermal guy]

I have one of them in TI on my U60 with 17650 tube. Long version

 

[RCS1300]

One of the reasons I purchased the Executive model was to add a clip easily. Purchased three Titanium Prometheus clips and used them on all three of my lights for about three weeks. Decided that they took away from the form and function of the HDS light and removed all of them. Went with a one strand lanyard to keep the lights from rolling on my nightstand and with Thors Hammer Custom Leather holsters for daily carry.

The three titanium Prometheus clips have sat in my drawer for over 4 months probably never to be used again.

Over the past year I had 10 very different Thors Hammer Custom holsters made for my lights. I sold off four of them and currently have 6 holsters. My favorite is the upside down draw with a military clip. It is simply outstanding in that I do not have to bend my elbow too far to get to the light or replace the light in the holster.

 

[jon_slider]

What is wrong with that ???

I think you need to realize that there is no need for a U shaped, screw on, bezel down clip, for a Clicky.
The Clicky already has a bezel down option, from the existing clip options, that fit under the tailcap, with no need for more screw holes, nor custom bezel.


for a Rotary
The U bend makes the clip taller, off the body, than a single layer clip
and
to provide bezel down carry, the U bend will need a gap not to touch the rotary dial.
Then the free floating bottom layer of the clip, will allow the U to flex, move, and press on the rotary dial, while carrying bezel down.

Its the Rotary that does not have a bezel down option, unless you like the Universal Clip.

One of the reasons I purchased the Executive model was to add a clip easily. ... Decided that they took away from the form and function of the HDS light and removed all of them. Went with a one strand lanyard to keep the lights from rolling on my nightstand...

I also prefer the ergonomics with no clip (and no lanyard)
the only reason I use a clip, is to stop the light from rolling off the nighstand.

I wanted a raised stop screw, using the existing hole, because then I would not need to use a clip or lanyard, as anti roll devices, and I would not need to drill into the head nor bezel to add holes for anti roll screws.

 

[paddyie]

Just a small UI optimization for the Clickys. Press-and-hold from off to enable Moonlight when Pseudo Momentary is disabled.

What do you guys think about it?

 

[Hogokansatsukan]

Just a small UI optimization for the Clickys. Press-and-hold from off to enable Moonlight when Pseudo Momentary is disabled.

What do you guys think about it?

This should be possible when we get the new brains in the lights and the Clicky gets a ramping UI option.

 

[thermal guy]

"I think you need to realize that there is no need for a U shaped, screw on, bezel down clip, for a Clicky.
The Clicky already has a bezel down option, from the existing clip options, that fit under the tailcap, with no need for more screw holes, nor custom bezel."


THAT is a bezel up bezel down clip.

 

[thermal guy]

This is all probably moot anyways. I heard tell the next UI update will include a clip option😄😂😂😂😂. Oh boy I need sleep. Sry.

 

[paddyie]

This should be possible when we get the new brains in the lights and the Clicky gets a ramping UI option.

Will the normal Presets still be available? Will it be possible to mix the ramping with the presets?

 

[Hogokansatsukan]

This is all probably moot anyways. I heard tell the next UI update will include a clip option. Oh boy I need sleep. Sry.

Stop stirring up trouble! LOL! I'll just have to go back later and dispel the rumors you are starting!
Next light you order... the reflector is getting licked. LOL!

Will the normal Presets still be available? Will it be possible to mix the ramping with the presets?

That is the plan.

 

[thermal guy]

LMAO. sorry officer.

 

[kaichu dento]

With all seriousness I am Curious. What exactly did people not like about the holes in the body to secure the clip.i would really like the take on this from those who disliked it.

I'm one who didn't like the holes, but it didn't ever ruin my weekend. Got to where I didn't want to see them go away though, once I put the screws in them, and besides, so many members liked them that even as a non-fan, I thought they should still be standard on all lights so that the clip users and non-clip users alike could make use of them.

 

[paddyie]

Holes for a clip would ruin the light for me. I Love the design as it is. I dont use clips on flashlights, so i would see the holes.

Maybe you could sell with two options? With clip holes and without?

 

[kaichu dento]

Holes for a clip would ruin the light for me. I Love the design as it is. I dont use clips on flashlights, so i would see the holes.

Maybe you could sell with two options? With clip holes and without?

I say just bring back the mounting holes and ship them with the filler screws already in place. Making two different sets of heads just ain't ever gonna fly.

 

[scout24]

I know the under bezel clip isn't HDS approved, but my personal Rotary has been running like that for about two years. It'ss seen it's share of trauma and abuse. Since 90% of sales are Rotaries, maybe a slight redesign of the body/head to make Henry happy with this setup? Surefire was bezel up for years, take it or leave it. HDS is certainly far more robust in that area, I can't see a problem unless you simply won't carry bezel up for whatever personal reason. Just like the current Clicky, if you don't like it don't use it...

 

[usdiver]

.865" or 2.20mm for thread length on the Rotary stop screw.