vudoo
Enlightened
Would the light with hat LED just be a wall of light?
You can become a Supporting Member.
Would the light with hat LED just be a wall of light?
See my post #7 in this thread and Vinh's answer #8 regarding XHP50 or XHP70. :-(
See my post #7 in this thread and Vinh's answer #8 regarding XHP50 or XHP70. :-(
Besides the reflector issue, this particular ZL has the LED, E. switch, and driver all integrated onto one MCPCB. The xhp50 and xhp70 each have completely different footprints (same as xml and MKR, respectively) from the xhp35 which has an XP footprint (much smaller). Even if one somehow made an adapter to set the LED on the XP footprint, it very well may not physically fit on the board, and would have a much smaller direct thermal path than if it were set on the correct board. If ZL is releasing an XHP-50 version, then they are completely redesigning the board/driver. I'm not trying to be a buzz kill. I would love to see it done too. But I suspect this may not be an option for these reasons.
Good point. Maybe he could ditch the stock driver and use a DriverVN2. Really, I just want a version of this light with an emitter with 90-95+ CRI, very close to the black body radiation line, 4000-5000K, and an output of around 1000 lumens on high. With a regular lens and smooth reflector(orange peal would be OK too though) would be nice too
Why is there a HiCRI XHP-50 but no HI CRI XHP-35?